KMI Quality

A Quality First philosophy means that manufactured products and services receive advanced quality assurance. Products are evaluated for continual improvement and normally exceed customer specifications.

KMI’s Quality Assurance Department is equipped with modern state of the art inspection instruments. It is third party certified and governed by written procedures as mandated and set forth in AS 9100 REV. D And ISO 9001:2015 Quality management Systems-Aerospace-Requirements.

KMI’s calibration system is in compliance with ANSI / NCSL Z540-1 and ISO 10012-1. KMI’s Quality Assurance Department is in a climate controlled area to ensure that tolerances and quality are maintained.

B&S Global Performance 9.15.8 Silver Edition CMM with HH-AS8-T2.5 Motorized Probe Head, HP-S-X1h Touch Trigger/Scanning Probe, and PC-Dmis Cad++ Software

Wilson Model 3-JR Hardness Tester

Surftest 211 Surface Analyzer ( profilometer )

Verimet Conductivity Meter

(2ea) .25-.75 Starrett Accubore Model 781

24″ x 36″ Inspection Grade Granite Surface Table

18″ x 24″ Inspection Grade Granite Surface Table

Precision Gage Pins From .011 to .750 in .001 increments

Over 150 Different Sizes of Certified Thread Plug and Thread Ring Gauges

(5ea) Sunnen Precision Bore Gage .375 to 3.00″ capacity .00005 Graduations

(2ea) Starrett Edge Sensing 16″ Screen Optical Comparator HB400-221E

Dial Bore Gages from .125 dia. to 6.0″ dia.

Mueller Dial Internal Groove / Bore Gauge

Mueller Dial Depth Gauge

Electronic Calipers to 12″

24″ Dial Calipers

18″ Digital Height Gauge

(2ea) 24″ Trimos Digital Height Gauge

0″ to 4″ Indicator Micrometers .00005 Graduations

0″ to 8″ Micrometers

0″ to 4″ Thread Micrometers

0″ to 3″ Blade Micrometers

Federal Electronic Indicator .00002 Graduations

Fowler Ceramic Gage Blocks.